Showing posts with label maxigrowapplication. Show all posts
Showing posts with label maxigrowapplication. Show all posts

MaxiGrow For Fisheries

MaxiGrow for Fisheries
Maxigrow for Fisheries

MaxiGrow application for fisheries contains microorganisms that are beneficial in aquaculture. These microorganisms work very effectively at the bottom of ponds / ponds or waters. MaxiGrow for fisheries is a special probiotic technology for ponds, after going through a fairly long process and has been tested in several pond locations showing very satisfactory results.
 
Read more articles :
 


Benefits of MaxiGrow for fisheries:
  • Improve and maintain pond water quality
  • Suppress the development of pathogenic bacteria in soil and pond water
  • Improve immunity and health of shrimp/fish against pests
  • Increase pond productivity
  • Improve the quality and amount of plankton in pond water
  • Improve the quality and quantity of shrimp/pond
  • Faster relativ harvest
  • Suppress potential pollution in the pond/pond environment
 MaxiGrow rules for fisheries:
  • Do not mix with chemicals and antibiotics
  • MaxiGrow external use (applied to soil during tillage, and to water during maintenance)
  • Probiotics are in good condition if they still smell good, if they smell bad, DO NOT USE !!
  • Diluted with water (DO NOT chlorine water !!

MaxiGrow application on Windu & Milkfish Shrimp ponds

MaxiGrow application on tiger shrimp and milkfish ponds.

POND LAND PROCESSING

Before turning the soil over, spray MaxiGrow (mixed with water) on the field evenly. This stage requires 2 liters of MaxiGrow per hectare. Then turn the soil by plowing or hoeing, leave it to dry, if it is impossible to dry then spread fine dolomite. For 1 hectare required as much as 500 - 600 Kg.

Read more article :
 


Re-spray MaxiGrow ponds evenly onto the surface of the field. This stage is required 2 liters of MaxiGrow. Leave for 3 days, apply fertilizer to the field, for 1 hectare required Urea as much as 100 Kg, SP36 60 Kg and KCL as much as 40 Kg. Let stand for 2 days.

Maxigrow applications on windu or shrimp ponds
Maxigrow applications on udang windu


 WATER FILLING

Done gradually, after reaching a height of approximately 60 cm, give MaxiGrow (mixed with water) as much as 2 liters per hectare. Let stand for 4 days. Fry or shrimp seedlings can be put into the pond. 
 
MAINTENANCE
  • Age 0 - 6 Weeks give MaxiGrow once a week as much as 2 liters per hectare. This stage requires 12 liters of MaxiGrow.
  • Age over 6 weeks - 12 weeks (3 months give MaxiGrow every 2 days as much as 2 liters. This stage required 44 liters of MaxiGrow.
  • Shrimp feed is still given as needed (results will be more optimal, water level must always be maintained.

Shrimp Harvest with Maxigrow Fertilizer
Shrimp Harvest with Maxigrow Fertilizer

ADVANTAGES ON THE FARM
  • Faster shrimp/fish growth
  • Increase shrimp/fish resistance to disease
  • Increased shooting productivity
Hatchery: Give MaxiGrow to the pond evenly as much as 2 liters per one hectare.

Sensing: Give MaxiGrow every 15 days to the pond evenly as much as 2 liters per one hectare. It is recommended to add supplements to the feed, so that fish growth becomes better.
 
Thus our article about "MaxiGrow application on Windu & Milkfish Shrimp ponds" may be useful

MaxiGrow Application On Eels

Alhamdulillah, after a hiatus of several months, I returned to writing and presenting information that hopefully has benefits for readers, especially the MaxiGrow application.


MaxiGrow is an amazing product, so its use should be known with certainty not the origin of its words.

In the previous post I have discussed clearly about the "MaxiGrow application on Coffee" Hopefully useful especially for coffee farmers, and on this happy occasion I will share the MaxiGrow application on Eels.

Eel is a kind of fish that lives in water. In the skin there is a breathing device so that when in the mud, the eel can still live and breathe. In the market, the price of eel per kilo is quite promising, so this is an opportunity. With MaxiGrow we can make that opportunity a reality.

Please also read our article about maxigow which may be useful
 
Eel cultivation with MaxiGrow is highly recommended because the main function of MaxiGrow itself can accelerate the fermentation of planting media and also as a microstarter that is useful for triggering the growth of tiny bodies / plankton as natural food from Eels.

Maxigrow agen
photo taken from an eel farmer in Palembang


There are 2 (two) stages of MaxiGrow provision for enlargement ponds (25 m2 with a depth of 1 meter):

When manufacturing the maintenance medium (1 liter of water is required)

Ingredients:
  • Drained pond mud
  • Manure
  • Compost (rice husks or rotted leaves)
  • Rice straw
  •  Chopped banana stems.
How to use :

MaxiGrow is dissolved first with water in a ratio of 1: 10, then spread it on the planting media evenly (spray is recommended)

How media is created :
  • Layer 1 (bottommost) is filled with mud with a thickness of 20 cm
  • Layer 2 manure with a thickness of 5 cm, then spray MaxiGrow dose 1/2 liter.
  • Layer 3 is soil or mud 10 cm thick
  • Layer 4 compost with a thickness of 5 cm, then spray MaxiGrow with a dose of 1/4 liter
  • A layer of 5 soil or silt with a thickness of 15 cm
  • A layer of 6 soil or silt with a thickness of 20 cm. Leave the layers for approximately 7 days so that the permentation process runs perfectly.
  • Layer 7 (topmost) is water with a height of 10-15 cm. Then sprinkled with chopped banana stems. Then leave until the media is mature (approximately 2 to 3 months), the water in the pond is disposed of, so that the fermentation residual waste is thrown out, then replace it with new water with a height of approximately 3 cm, until this stage the seedlings are not ready to be put into the pond
During maintenance (1-2 liters of MaxiGrow required)

Furthermore, the maintenance period of the enlargement pond, give MaxiGrow on the water surface evenly every 2 weeks until before harvest.

Thus the discussion about the maxigrow application on eels, hopefully useful!

MaxiGrow Application on Mina Padi

MaxiGrow application on mina padi - Sell MaxiGrow liquid fertilizer and receive registration to become a member of PT. MAKSIPLUS INDONESIA.

Maxigrow applications on mina padi
Maxigrow applications on mina padi


The rice mina system is a way of raising fish on the sidelines of rice plants. The types of fish that can be kept in the system are Goldfish, Nila, Mujair, Karper, Tawes etc.

Read more articles :





Tilapia is the type of fish that is best kept in rice fields, because tilapia can grow well even in shallow water, and is more resistant to sunlight.

In order for the growth of rice plants not to be disturbed, the maintenance of fish in rice fields must be adjusted to the existing irrigation system, so that rice production is not disturbed. Suitable rice fields for rice mining are fields that have technical and semi-technical irrigation. Besides being a profitable business, Mina Padi business can also increase farmers' income, and help government programs in an effort to meet family nutrition.

In addition, the advantages obtained in this rice mining system include: Reducing pests and diseases in rice plants, rice fields become fertile with the presence of fish manure that contains various nutrients, reducing the use of fertilizers, fish can also limit the growth of other plants that are competitors (competitors) with rice in the use of nutrients, reducing the cost of weeding wild plants.

Mina rice is included in a mixed cropping system, viewed from an agronomic perspective.


MaxiGrow application on mina padi with a land area of 1 Ha is as follows:

  • Application I at the time of tillage, with a dose of 2 liters MaxiGrow
  • Application II 15 days after planting/stocking with a dose of 2 liters MaxiGrow
  • Application III 45 days after planting/stocking with a dose of 2 liters MaxiGrow
For optimal results, spray MasiGrow on the feed. Provided that every 100 kg of feed is sprayed MaxiGrow with a dose of 10 MaxiGrow caps mixed with 15 liters of water. Stir evenly, let stand 10 minutes and then spray on the feed.

MaxiGrow Application on Peanuts

MaxiGrow is amazing, after previously we discussed about the application of MaxiGrow on cocoa / chocolate. Now it's the turn of peanuts who will get a touch of this super extraordinary liquid biofertilizer.


Peanuts thrive with MaxiGrow
Maxigrow applications on peanuts


The ideal place for peanut cultivation is an area with an altitude of 50 – 500 m. Has rainfall between 800 – 1300 mm / year, air temperature ranges from 28 ° C - 32 ° C (temperatures below 10 ° C, plant growth will be stunted, even stunted) with air humidity of 65 – 75%. In addition, full sunlight is needed, because it will affect photosynthesis. Rain that is too hard will cause flowers to be difficult to pollinate by insects.
 
Read more articles :
 
 
 


Growing media
 
The type of soil suitable for peanut cultivation is loose / light textured soil and fertile, pH between 6.0 -6.5. It has good drainage and aeration, the land is not too muddy and dry is good for peanut growth.

Seed terms
  • Derived from new plants and high-yielding varieties or from seed breeding centers that have been appointed by seed certification centers.
  •  High growth power (more than 90%) and healthy
  •  The seed skin is shiny, not wrinkled and deformed.
  •  Pure or unmixed with other varieties.
  •  Seed moisture content ranges from 9 – 12 %
Tillage

Tillage by plowing/hoeing for cleaning from all kinds of weeds (nuisance plants) and plant roots. Make beds measuring 80 cm wide, bed height 20 cm – 30 cm, between 2 beds a water channel trench is made.

On acidic land, do liming with a dose of ±1 – 2.5 tons / ha. Leave for ±1 Month. A week before planting, sprinkle 5 tons / ha of manure, apply it to the surface of the bed or apply it to the planting hole. Then spray the MaxiGrow solution evenly on the surface or hole that has been fed with manure earlier.
The planting distance in peanut plants is: 40 cm x 15 cm, 30 cm x 20 cm or 20 cm x 20 cm.

Fertilization (1Ha)
Chemical fertilizers are applied entirely at the time of planting. The types of fertilizers used are: SP-36 (100 Kg / Ha), ZA (100 Kg / Ha) and KCL (50 Kg / Ha) or according to local recommendations.

MaxiGrow Biofertilizer (1Ha)
Sprouts have aged 2 weeks, give MaxiGrow solution (2 liters MaxiGrow : Max 200 liters of water) on the planting media around the sprouts. Give back MaxiGrow solution at the age of 50 to 55 days, 3 to 4 liters.

MaxiGrow Application On Cocoa or Chocolate

MaxiGrow application on cocoa or chocolate
Maxigrow application on cocoa or chocolate


MaxiGrow Application on Cocoa/Chocolate - Cocoa trees grow in the tropics, at an altitude of 10 to 500 meters above ground level. Brown trees in general can reach a height of 5-6 meters, can flower and bear fruit throughout the year from the age of 4-5 years.


How to use MaxiGrow combined with chemical fertilizers.

Land preparation

Make holes for plant seedlings with a size of 40 x 40 x 40 cm, then put 20 kg of manure leave for 1 month. Then the seedlings are ready for insertion in the planting hole.

Immature plants (given from 15 HDT)

Apply MaxiGrow solution (1 to 2 liters MaxiGrow: Max 200 liters of water) around the base of the stem, as much as ±1 to 2 liters, repeat every 4 months. At this stage for one application, MaxiGrow is needed as much as 1 to 2 liters per hectare or per year it takes 4 to 6 liters.
 
Read more articles :
 
 
 

The chemical fertilizer given is a mixture of urea fertilizer 200gr, TSP 100gr and KCL 75gr or can be in the form of compound fertilizer N-P-K-Mg (15-15-6-4) as much as 300gr trees, apply around the base of the trunk. Repeat every 6 months (once at the beginning of the rainy season and once at the end of the rainy season)

Plants already produce

Give MaxiGrow solution (2 to 3 liters MaxiGrow: Max 200 liters water) as much as ±1 to 2 liters on each tree, give around the base of the trunk, repeat every 3 to 4 months. At this stage for one application, MaxiGrow needed 3 to 4 liters per hectare or per year it takes 12 to 16 liters.

The chemical fertilizer needed is a mixture of urea fertilizer 500gr, TSP 200gr and KCL 300gr or it can be in the form of N-P-K-Mg (15-15-6-4) compound fertilizer as much as 1Kg on each tree, give around the base of the trunk. Repeat every 6 months (once at the beginning of the rainy season and once at the end of the rainy season).

MaxiGrow Application On Corn

MaxiGrow Application - In this post, we will explain about the MaxiGrow application on Corn.

Successfully develop Chili cultivation with MaxiGrow. The use of MaxiGrow in corn plants will soon be seen together.


Maxigrow applications on Corn
MaxiGrow Effect


The ideal place for corn cultivation is an area with an altitude of 50 - 600 m which has rainfall of about 85 - 200 mm / month, optimum temperature between 23 ° - 30 °, loose, fertile and humus-rich soil, soil pH between 5.6 - 7.5, aeration (air flow into water to increase oxygen content) and good water availability, soil slope less than 80 °.

LAND PROCESSING

  • The soil to be planted is hoeed 15 - 20 cm deep, then leveled. Every 3 meters a drainage channel is made along the rows of plants. Channel width 25 - 30 cm, depth 20 cm. These channels are made mainly on poorly drained soils. Areas with a pH of less than 5, danah is limeed (dose 300 Kg / Ha) by spreading lime evenly on the rows of plants, ± 1 month before planting.
  • Apply manure as much as 6 tons / ha, applied along the run of plants before planting. Then apply MaxiGrow solution (1 liter MaxiGrow : 200 liters of water) at each planting point. This stage requires 2 to 3 liters of MaxiGrow per Ha.
  • Planting holes in tugal (holes are made for seeds in the ground), a depth of 3-5 cm, and each hole is only filled with 1 seed. Corn planting distance is adjusted to the age of harvest, the longer the planting distance, the wider. Corn is harvested more than 100 days since planting, the planting distance is 40 cm x 100 cm (2 seeds/hole). Corn harvest age 80 - 100 days, planting distance 25 cm x 75 cm (1 seed/hole)
FERTILIZATION

The need for chemical fertilizers per hectare in corn plants is:
  • Urea = 175 Kg
  •  TSP = 60 Kg
  •   KCL = 75 Kg

Read more article :


Given 2 times, the first administration with a dose of 1/3 dose of Urea and all TSP and KCL given at the time of planting, the remaining 2/3 dose of Urea given at the age of 5 weeks after planting.  Giving MaxiGrow again at 35 to 37 days after planting, as much as 3 to 4 liters.

Pest control is carried out by monitoring in the field, namely insecticide spraying is only carried out if a destructive pest attack is found.

MAXIGROW EFFECT IN LAMPUNG

Corn grown with MaxiGrow fertilizer technology grows large to 1 cob Corn weighs up to 1 kilo. In North Sumatra, corn fields that previously produced 2-4 tons per hectare, increased by 7 tons after using MaxiGrow technology biofertilizer.
 

Mengenai Saya

Most Reading

Optimize by Jasa SEO. Powered by Blogger.