MaxiGrow Application on Coffee

Maxigrow applications on coffee
Maxigrow applications on coffee


Maxigrow Applications on Coffee - Coffee grows in areas with an altitude of 800-1500 above sea level, rainfall 1250-3000 mm, temperature 18 °-25 °, soil solum depth at least 30 cm, air humidity 70-80%, slope 0-40 °, soil pH 5.5-6.5.

Read more articles :
 
 
 


FERTILIZING WHEN SEEDLING
  • Spray the growing medium with MaxiGrow before using for seedlings.
  •  Water MaxiGrow solution evenly on each planting medium, when aged 10 days (1 liter MaxiGrow mixed with 100 liters to 150 liters of water, enough for 300 to 400 large polybags)
  •  Next, fertilize MaxiGrow once a month until planting.
FERTILIZATION DURING PLANTING AND UNPRODUCTIVE PERIOD
  • Previously the soil is processed, planting holes are made and fed with manure.
  •  Every day before planting, water the field/planting area evenly with MaxiGrow solution. It takes 2 to 3 liters of MaxiGrow mixed with 100 to 200 liters of water per hectare.
  •  Next, fertilize MaxiGrow every 2 to 3 months until the age of 16 months.
FERTILIZER APPLICATION WHEN COFFEE HAS BEGUN TO BE PRODUCTIVE
  • It takes 6 to 12 liters of MaxiGrow fertilizer every year.
  • Fertilize every 3 to 4 months, using 2 to 3 liters of MaxiGrow per application.
  • Dilute 2 to 3 liters of MaxiGrow with 100 to 200 liters of water.
  • For effective fertilization, make 4 holes (4 cardinal directions) with a depth of 20 cm with a diameter of 5 cm.
  • The distance of the hole from the tree trunk is 1/2 crown (half the distance between the tip of the outer leaf and the tree trunk), or approximately 1.5 meters.
  • Pour on each hole 250 ml of MaxiGrow solution.
  • Chemical fertilizers are given in accordance with local recommendations, but it is always arranged that the application of chemical fertilizers is carried out after MaxiGrow fertilization.


MaxiGrow Application on Mina Padi

MaxiGrow application on mina padi - Sell MaxiGrow liquid fertilizer and receive registration to become a member of PT. MAKSIPLUS INDONESIA.

Maxigrow applications on mina padi
Maxigrow applications on mina padi


The rice mina system is a way of raising fish on the sidelines of rice plants. The types of fish that can be kept in the system are Goldfish, Nila, Mujair, Karper, Tawes etc.

Read more articles :





Tilapia is the type of fish that is best kept in rice fields, because tilapia can grow well even in shallow water, and is more resistant to sunlight.

In order for the growth of rice plants not to be disturbed, the maintenance of fish in rice fields must be adjusted to the existing irrigation system, so that rice production is not disturbed. Suitable rice fields for rice mining are fields that have technical and semi-technical irrigation. Besides being a profitable business, Mina Padi business can also increase farmers' income, and help government programs in an effort to meet family nutrition.

In addition, the advantages obtained in this rice mining system include: Reducing pests and diseases in rice plants, rice fields become fertile with the presence of fish manure that contains various nutrients, reducing the use of fertilizers, fish can also limit the growth of other plants that are competitors (competitors) with rice in the use of nutrients, reducing the cost of weeding wild plants.

Mina rice is included in a mixed cropping system, viewed from an agronomic perspective.


MaxiGrow application on mina padi with a land area of 1 Ha is as follows:

  • Application I at the time of tillage, with a dose of 2 liters MaxiGrow
  • Application II 15 days after planting/stocking with a dose of 2 liters MaxiGrow
  • Application III 45 days after planting/stocking with a dose of 2 liters MaxiGrow
For optimal results, spray MasiGrow on the feed. Provided that every 100 kg of feed is sprayed MaxiGrow with a dose of 10 MaxiGrow caps mixed with 15 liters of water. Stir evenly, let stand 10 minutes and then spray on the feed.

MaxiGrow Application on Rice

MaxiGrow Application on Rice - Rice can grow at an altitude of 0 - 1,500 m with temperatures of 19-27 degrees Celsius, requiring full sun without obstruction.

MaxiGrow Application on Rice
MaxiGrow Application on Rice


Also read our previous article about MaxiGrow application on peanuts. which thoroughly peels the MaxiGrow application on peanuts from start to finish.

Back to the discussion of MaxiGrow applications on rice.

In addition to direct sunlight without aling-aling (the term urang Sunda mah), wind also affects the process of pollination and fertilization. Rice requires fertile mud soil with a thickness of 18 - 22 cm and soil pH 4 - 7.

Read More Articles :

Maxigrow applications on mina padi

Maxigrow applications on coffee

Maxigrow applications on eels


 Step by step MaxiGrow application on rice

  • 1st MaxiGrow feeding (3 days before planting)
  • After the soil is cultivated or plowed, the rice field is in a state of little water, give MaxiGrow solution (2 to 3 liters of MaxiGrow with a maximum of 100 liters of water) on the field evenly. This stage requires 2 to 3 liters of MaxiGrow per hectare and leave it for 3 days then it is ready for planting.
  • The last MaxiGrow feeding (when bunting will come out panicles).
  • Rice fields in a state of little water, give MaxiGrow solution (3 to 4 liters MaxiGrow with 100 liters to 150 liters of water) on the field evenly. This stage requires 3 to 4 liters of MaxiGrow per hectare.
  • Because the rice plants are already dense, try to open the spray spuyer larger so that the MaxiGrow solution can fall to the ground.
  • Application of chemical fertilizers (45 days after planting)
  • Make a mixture of chemical fertilizers consisting of Urea 80 Kg, TSP / SP-36 25Kg and KCL 50Kg, stir until smooth then spread evenly on 1 hectare of land.

MaxiGrow Farmer at Nurul Wasilah Islamic Boarding School
Kp.Mekar Wangi Ds/Kc.Tanggeung - South Cianjur

The photos below are the second harvest using MaxiGrow and Alhamdulillah increased to 60%. The rice produced is organic rice that is safe for consumption free from harmful chemical fertilizers.
Location of rice fields Mr. Ruli Nugraha Address Kp.Bojongkadu Ds.Batulawang,Kc.Cibinong - South Cianjur.

abundant rice harvest with maxigrow
abundant rice harvest with maxigrow

Rice of maxigrow
Rice of Maxigrow

organic rice with maxigrow
organic rice with maxigrow





MaxiGrow Application on Peanuts

MaxiGrow is amazing, after previously we discussed about the application of MaxiGrow on cocoa / chocolate. Now it's the turn of peanuts who will get a touch of this super extraordinary liquid biofertilizer.


Peanuts thrive with MaxiGrow
Maxigrow applications on peanuts


The ideal place for peanut cultivation is an area with an altitude of 50 – 500 m. Has rainfall between 800 – 1300 mm / year, air temperature ranges from 28 ° C - 32 ° C (temperatures below 10 ° C, plant growth will be stunted, even stunted) with air humidity of 65 – 75%. In addition, full sunlight is needed, because it will affect photosynthesis. Rain that is too hard will cause flowers to be difficult to pollinate by insects.
 
Read more articles :
 
 
 


Growing media
 
The type of soil suitable for peanut cultivation is loose / light textured soil and fertile, pH between 6.0 -6.5. It has good drainage and aeration, the land is not too muddy and dry is good for peanut growth.

Seed terms
  • Derived from new plants and high-yielding varieties or from seed breeding centers that have been appointed by seed certification centers.
  •  High growth power (more than 90%) and healthy
  •  The seed skin is shiny, not wrinkled and deformed.
  •  Pure or unmixed with other varieties.
  •  Seed moisture content ranges from 9 – 12 %
Tillage

Tillage by plowing/hoeing for cleaning from all kinds of weeds (nuisance plants) and plant roots. Make beds measuring 80 cm wide, bed height 20 cm – 30 cm, between 2 beds a water channel trench is made.

On acidic land, do liming with a dose of ±1 – 2.5 tons / ha. Leave for ±1 Month. A week before planting, sprinkle 5 tons / ha of manure, apply it to the surface of the bed or apply it to the planting hole. Then spray the MaxiGrow solution evenly on the surface or hole that has been fed with manure earlier.
The planting distance in peanut plants is: 40 cm x 15 cm, 30 cm x 20 cm or 20 cm x 20 cm.

Fertilization (1Ha)
Chemical fertilizers are applied entirely at the time of planting. The types of fertilizers used are: SP-36 (100 Kg / Ha), ZA (100 Kg / Ha) and KCL (50 Kg / Ha) or according to local recommendations.

MaxiGrow Biofertilizer (1Ha)
Sprouts have aged 2 weeks, give MaxiGrow solution (2 liters MaxiGrow : Max 200 liters of water) on the planting media around the sprouts. Give back MaxiGrow solution at the age of 50 to 55 days, 3 to 4 liters.

MaxiGrow Application On Cocoa or Chocolate

MaxiGrow application on cocoa or chocolate
Maxigrow application on cocoa or chocolate


MaxiGrow Application on Cocoa/Chocolate - Cocoa trees grow in the tropics, at an altitude of 10 to 500 meters above ground level. Brown trees in general can reach a height of 5-6 meters, can flower and bear fruit throughout the year from the age of 4-5 years.


How to use MaxiGrow combined with chemical fertilizers.

Land preparation

Make holes for plant seedlings with a size of 40 x 40 x 40 cm, then put 20 kg of manure leave for 1 month. Then the seedlings are ready for insertion in the planting hole.

Immature plants (given from 15 HDT)

Apply MaxiGrow solution (1 to 2 liters MaxiGrow: Max 200 liters of water) around the base of the stem, as much as ±1 to 2 liters, repeat every 4 months. At this stage for one application, MaxiGrow is needed as much as 1 to 2 liters per hectare or per year it takes 4 to 6 liters.
 
Read more articles :
 
 
 

The chemical fertilizer given is a mixture of urea fertilizer 200gr, TSP 100gr and KCL 75gr or can be in the form of compound fertilizer N-P-K-Mg (15-15-6-4) as much as 300gr trees, apply around the base of the trunk. Repeat every 6 months (once at the beginning of the rainy season and once at the end of the rainy season)

Plants already produce

Give MaxiGrow solution (2 to 3 liters MaxiGrow: Max 200 liters water) as much as ±1 to 2 liters on each tree, give around the base of the trunk, repeat every 3 to 4 months. At this stage for one application, MaxiGrow needed 3 to 4 liters per hectare or per year it takes 12 to 16 liters.

The chemical fertilizer needed is a mixture of urea fertilizer 500gr, TSP 200gr and KCL 300gr or it can be in the form of N-P-K-Mg (15-15-6-4) compound fertilizer as much as 1Kg on each tree, give around the base of the trunk. Repeat every 6 months (once at the beginning of the rainy season and once at the end of the rainy season).

MaxiGrow Application on Teak Tree

MaxiGrow application on Teak trees - MaxiGrow is a multi-functional organic liquid fertilizer, besides it can be used for fattening sangkuriang catfish.

MaxiGrow can also be used for Teak tree enlargement. In Java, MaxiGrow has proven its greatness. MaxiGrow Teak tree age 2 Year is as big as Teak tree age 5 Years.


A 2 year old MaxiGrow teak tree is the same as a 5 year old without MaxiGrow
Illustration Picture taken from a fellow Maksiplus Member 
 
FERTILIZING WHEN SEEDLING

  • Spray the growing medium with MaxiGrow before using for seedlings. If the planting medium is mixed with manure or other fertilizers, there must be a break of 3 days after or before the use of MaxiGrow.
  • Water MaxiGrow solution evenly on each planting medium, when 10 days old (1 liter of MaxiGrow mixed with 50 to 100 liters of water, enough for 300 to 400 large polybags).
  • Next, fertilize MaxiGrow once a month until planting.
 
Read More Articles :
 
 
 

 
 
FERTILIZING DURING PLANTING AND CARE
  • Previously the soil is processed, planting holes are made and fed with manure.
  • Three days before planting, water the field/planting area evenly with MaxiGrow solution. It takes 2 liters of MaxiGrow mixed with 100 to 200 liters of water per hectare.
FERTILIZING FOR TREATMENT
  • It takes 6 to 12 liters of MaxiGrow fertilizer every year.
  • Fertilize once every 2 to 4 months, using 2 to 3 liters of MaksiGrow per application.
  • Dilute 2 to 3 liters of MaxiGrow with 100 to 200 liters of water.
  • For effective fertilization, make 4 holes (4 cardinal directions) with a depth of 20 cm with a diameter of 5 cm.
  • The distance of the hole from the Teak tree trunk is 1/2 crown (1/2 the distance between the tip of the outer leaf and the tree trunk), or approximately 1.5 meters.
  • Pour on each hole of MaxiGrow solution
  • Chemical fertilizers are applied in accordance with local recommendations, but it is always arranged that the application of chemical fertilizers is carried out three days after MaxiGrow fertilization.
Thus the discussion on the maxigrow application on teak tree. Hopefully this article is useful and helps Indonesian farmers achieve maximum results. Please share or write comments to share information thank you.

MaxiGrow Application on Sangkuriang Catfish

MaxiGrow application on Sangkuriang Catfish is able to increase catfish production, faster harvest period, egg laying ability and high egg hatchability, more resistant to disease, superior meat quality and easier maintenance techniques.

 

MaxiGrow Effect to sangkuriang catfish
MaxiGrow Application on Sangkuriang Catfish

 

An illustration: Bioplok Diameter 2 Meters. Can accommodate 3,000 - 6,000 catfish. The cost of buying materials is about 2 million. Buy 3 million seeds. Buy 4 million feed, the total cost is 9 million. Estimated 3-Month harvest 850 Kg x Rp 15,000 = 12,750,000. Net income 3.750.000/ 3 Months @ 1.250.000/Month

In the maintenance of Sangkuriang Catfish, it is recommended not to change the water at all during the maintenance period. It is not recommended that there is running water or water coming out of the pool. With certain treatments even though the water is not replaced, the water is completely odorless.


Application of MaxiGrow Probiotics on tarpaulin ponds

  • Give 1 liter of MaxiGrow to the tarpaulin pool water media
  •  Let stand for 1 week, until the water appears green
  •  Green water means that natural fish feed is widely available in ponds
  •  1 Liter MaxiGrow is applied to each fish feed.

MaxiGrow Application in Fish Feed

Dosage for 1000 catfish = 2.5 Kg pellets + 1 MaxiGrow bottle cap + 0.5 liters of water. Mix until smooth and let stand for 10 minutes, after that give it to the fish. The purpose of the mixture is so that MaxiGrow probiotics can absorb into each pellet grain. The pellets become slightly moist and fluffy so they are safe if consumed by fish (pellets do not expand in the stomach of the fish) Application of MaxiGrow Probiotics in Soil Ponds.

 

Read More Article :

Maxigrow Application on Teak Tree

Maxigrow Application on Cocoa or Chocolate

Maxigrow Application on Peanuts



Apply 2 liters of MaxiGrow to the pool media :

  • Let stand for 1 week, until the water appears green
  •  Green water means that natural fish feed is widely available in ponds
  •  Application of 2 liters of MaxiGrow is given on each feed
  •  Until harvest

Advantages of Using MaxiGrow :

  • Pond media rich with natural fish feed (dense green color)
  •  Death rate drops by 0 - 5 %
  •  Fish meat is denser and savory (does not smell of mud)
  •  pH controlled water
  •  Save fish feed 20 - 30%
  •  FCR 8-9 %

MaxiGrow Application in Chickens

MaxiGrow is a complete biofertilizer that can produce organic chicken.

Maxigrow applications in chickens


The multi-functionality of MaxiGrow makes it superior in all fields (animal husbandry, agriculture, plantations and fisheries). MaxiGrow is liquid so that in its application it is more plexible.

Application of MaxiGrow in chickens. Giving livestock MaxiGrow probiotics mixed in drinking water. And the application method is:
  • Recommended dose per 1000 heads (for morning and evening) 2 applications.
    • Week I : 60 ml MaxiGrow dissolved with 70 liters of water.
    • Week II : 70 ml MaxiGrow dissolved with 80 Liters of water
    • Week III etc : 80 ml MaxiGrow dissolved with 90 Liters of water
  • Application :
    MaxiGrow is administered every morning and evening (according to recommended dosage)
    For DOC, MaxiGrow is given 4 days after the use of eye vaccine.
    MaxiGrow feeding is stopped (no longer given) 10 days before or before harvest).
    Giving MaxiGrow according to the dosage and recommended time mentioned above regularly.
Read More Article :
 
 
 

 
When applying the vaccine, MaxiGrow administration on that day is stopped, given back the next day.

MaxiGrow Application On Corn

MaxiGrow Application - In this post, we will explain about the MaxiGrow application on Corn.

Successfully develop Chili cultivation with MaxiGrow. The use of MaxiGrow in corn plants will soon be seen together.


Maxigrow applications on Corn
MaxiGrow Effect


The ideal place for corn cultivation is an area with an altitude of 50 - 600 m which has rainfall of about 85 - 200 mm / month, optimum temperature between 23 ° - 30 °, loose, fertile and humus-rich soil, soil pH between 5.6 - 7.5, aeration (air flow into water to increase oxygen content) and good water availability, soil slope less than 80 °.

LAND PROCESSING

  • The soil to be planted is hoeed 15 - 20 cm deep, then leveled. Every 3 meters a drainage channel is made along the rows of plants. Channel width 25 - 30 cm, depth 20 cm. These channels are made mainly on poorly drained soils. Areas with a pH of less than 5, danah is limeed (dose 300 Kg / Ha) by spreading lime evenly on the rows of plants, ± 1 month before planting.
  • Apply manure as much as 6 tons / ha, applied along the run of plants before planting. Then apply MaxiGrow solution (1 liter MaxiGrow : 200 liters of water) at each planting point. This stage requires 2 to 3 liters of MaxiGrow per Ha.
  • Planting holes in tugal (holes are made for seeds in the ground), a depth of 3-5 cm, and each hole is only filled with 1 seed. Corn planting distance is adjusted to the age of harvest, the longer the planting distance, the wider. Corn is harvested more than 100 days since planting, the planting distance is 40 cm x 100 cm (2 seeds/hole). Corn harvest age 80 - 100 days, planting distance 25 cm x 75 cm (1 seed/hole)
FERTILIZATION

The need for chemical fertilizers per hectare in corn plants is:
  • Urea = 175 Kg
  •  TSP = 60 Kg
  •   KCL = 75 Kg

Read more article :


Given 2 times, the first administration with a dose of 1/3 dose of Urea and all TSP and KCL given at the time of planting, the remaining 2/3 dose of Urea given at the age of 5 weeks after planting.  Giving MaxiGrow again at 35 to 37 days after planting, as much as 3 to 4 liters.

Pest control is carried out by monitoring in the field, namely insecticide spraying is only carried out if a destructive pest attack is found.

MAXIGROW EFFECT IN LAMPUNG

Corn grown with MaxiGrow fertilizer technology grows large to 1 cob Corn weighs up to 1 kilo. In North Sumatra, corn fields that previously produced 2-4 tons per hectare, increased by 7 tons after using MaxiGrow technology biofertilizer.

MaxiGrow Application on Chili

Alhamdulillah, on this occasion still given a long life to again provide information about agriculture, which will be discussed this time is about "MaxiGrow Application on fruits". In the previous article I have provided information about the application of MaxiGrow on fruits of perennials such as: Avocado, Apple, Starfruit, Durian, Guava, Orange, Harp, Mango, Mangosteen, Jackfruit, Pear, Papaya, Rambutan, Sawo, Srikaya etc.


Cabe Merah Keriting Jenis TM99
Red Chili genus TM99



Chili can grow at low or high altitudes, depending on the variety. Good soil in chili cultivation is one that has a soil pH on a scale of 5-6. Chili cultivation is often faced with various problems / risks, including: technical cultivation, nutrient deficiencies, pest and disease attacks.

LAND PROCESSING

Land processing by making beds then fed manure on each bed, then spray MaxiGrow solution with a ratio of 1 liter MaxiGrow: 100 liters of water then cover with soil and mulch (if using). Leave it at least 3 days, then it is ready for planting. At this stage, MaxiGrow needs as much as 2 liters per hectare and manure as much as 4-6 tons per hectare.


a mix of chilies and onions
a mix of chilies and onions



2ND MAXIGROW FEEDING

Spray MaxiGrow solution. For 2 liters MaxiGrow mixed with 100 liters of water around the base of the stem. At this stage MaxiGrow needs 2 liters per hectare.

1st APPLICATION OF CHEMICAL FERTILIZERS (15 to 18 Days after planting)

The needs for 1 hectare of land are as follows:

  • Urea/ZA      = 80 Kg
  •  TSP/SP-36  = 100 Kg
  •  KCL            = 75 Kg

Stir thoroughly and apply to around the base of the stem (a distance of 10 cm from the stem), then cover with soil. Assuming that if 1 hectare there are 12,000 trees, then for each tree a mixture of chemical fertilizers as much as ± 20 Grams.

 

Read more out article :

Maxigrow Applications on Corn

Maxigrow Applications on Chickens

Maxigrow Applications on Sangkuriang Catsfish


2nd APPLICATION OF CHEMICAL FERTILIZERS (35 to 40 Days after planting)

The application of chemical fertilizers in the 2nd way is the same as the first application, namely:
  • Urea/ZA     = 80 Kg
  • TSP/SP-36 = 120 Kg
  • KCL           = 100 Kg
Assuming if 1 hectare there are 12,000 trees, then for each tree a mixture of chemical fertilizers as much as ± 25 Grams.

BENEFITS OF MAXIGROW FOR CHILI PLANTS
 
  • Resistant to Trip disease (curly leaves)
  • Strengthens plant resistance to diseases
  • Chili trees can be picked up to 40 times, whereas generally only 20 times picked.
  • North Sumatran farmers have proven the greatness of MaxiGrow, since using MaxiGrow their chili leaves are no longer curly.
 

The results of using maxigrow on chili
The results of using maxigrow on chili

MaxiGrow application on fruits

After understanding the application of MaxiGrow on shallots. On this occasion I will share the MaxiGrow Application on fruits of perennials such as: Avocado, Apple, Starfruit, Durian, Guava, Orange, Harp, Mango, Mangosteen, Jackfruit, Pear, Papaya, Rambutan, Sawo, Srikaya etc.


Aplikasi MaxiGrow
Kakao MaxiGrow


Read more article :

 

FERTILIZING WHEN SEEDLING

  • Spray the growing medium with MaxiGrow before using it for seedlings.
  • Water MaxiGrow solution evenly on each planting medium, when aged 10 days (1 liter MaxiGrow mixed with 50 to 100 liters of water. Enough for 300 - 400 large polybags).
  •  Fertilize MaxiGrow once a month until planting time.
FERTILIZING DURING PLANTING
  • Previously, the soil was given planting holes and applied manure and MaxiGrow 1 to 2 liters / hectare
FERTILIZING TREES AFTER PLANTING

  • It takes 6 to 12 liters of MaxiGrow fertilizer every year.
  • Fertilize once every 2 to 3 months using 2 liters of MaxiGrow per application.
  • Dilute 2 to 3 liters of MaxiGrow with 100 to 300 liters of water.
  • For effective fertilization, make 4 holes (4 cardinal directions) with a depth of 20 cm with diameter of 5 cm. The distance of the hole from the tree trunk is 1/2 crown (1/2 the distance between the tip of the outer leaf and the tree trunk), or approximately 1.5 meters.
  • Pour each tree 500 to 1000 ml MaxiGrow solution.
  • Chemical fertilizers are given in accordance with local recommendations, but it is always arranged that the application of chemical fertilizers is carried out after MaxiGrow fertilization.
 
For registration in Tangerang please contact:

Yana Subagja
Address : Jl.Raya Serpong Km.7 Tangerang - Selatan
Phone / SMS : 085715813629 / 082213969564
WA : 082213960564
Email : yana.subajja@yahoo.co.id

Maxigrow application on shallots

Shallots can grow on wetlands such as rice fields, as well as dry lands such as moor. The use of MaxiGrow biofertilizer on shallots must be followed step by step from start to finish for maximum results.


Pemakaian maxigrow pada bawang merah di sawah

How to use MaxiGrow combined with chemical fertilizers on onion plants.

Tillage (1st MaxiGrow Award)

  • The land that has been made beds at the top is fed with mature manure, then spray MaxiGrow solution with a dose of 1 Liter MaxiGrow mixed with 100 Liters of water. Then cover the surface of the beds with earth. Leave it at least 3 days, then it is ready for planting.
  • At this stage of tillage, MaxiGrow needs only 2 - 3 liters per hectare and manure as much as 4 tons per hectare.

Read more article :

After planting 30 to 35 days (2nd MaxiGrow Award)

Spray MaxiGrow 3 - 4 liters MaxiGrow solution with 100 liters of water around the base of the stem.

Efek maksigrow terlihat dari pertumbuhan awal


The application of chemical fertilizers must be in accordance with the recommended doses and use.
The needs of chemical fertilizers with 1 hectare of land are as follows:
  • Urea/ZA = 100 Kg
  • TSP/SP-36 = 150 KgKCL = 100 Kg
  • Mix thoroughly, apply to the base of the stem (10 cm distance from the stem) then cover  with soil.
 
Diseases of onions and how to control them.
 
Anthracnose. Disease in the root due to the attack of Colletotrichum Gloeosporoides or better known as Inul and Twister.Symptom. The tips of the leaves dry out, the young leaves turn yellow and the leaves twist.Control. Spray fungicides with active ingredients Karbendenzyme or Mancozeb. If there are not too many attacks, you can uproot and burn the affected plants. 
 
Usarium Oxysporum. Symptom. The tips of the leaves wither and turn yellow, twist and necrosis. The roots are black and fragile, the base of the roots rot. Fusarium can also attack harvested onion bulbs contained in storage warehouses.Control. Spray fungicides with active ingredients Karbendenzyme or Mancozeb
Grayak caterpillar. Symptom. The leaves are hollowed out little by little until they run out. The pest Spodoptera Litura feeds on the epidermis of the leaves first and then the tissue part. Prevention of leafworm attacks, earthworms and armyworms can be by weeding the land before planting.
 
Fusarium. Caused by dead Fh fungi. Control by using natural enemies, if the attack is very much can use insecticides made from active ingredients Bacillus Thuringiensis or Chlorfenapir or spinosad.
 
Trips. As a result of the attack of Thrips tabaci. Symptoms include silvery-white spots, puncture marks and pest bites then spread to the entire surface of the leaves. His control. Spray fungicides with the active ingredient chlorphenapir.
#maxigroweffect

Benefits of MaxiGrow

MaxiGrow is an innovative product from PT. MaksiPlus Utama Indonesia is engaged in food development: agriculture, fisheries and animal husbandry. In order to help the government realize food self-sufficiency by improving the quality, quality and quantity of plants, fish and livestock.



System keagenan maxigrow


MaxiGrow is a 100% safe bio fertilizer with no side effects on plants, livestock, and fish. Revolutionary products from PT. MaksiPlus Utama Indonesia which functions as bio-organic fertilizer, for plantations, animal feed, and fish food.

MaxiGrow is needed by farmers, ranchers, plantation owners, home hydroponic plant owners and everyone who has a garden or small garden in the front yard or backyard. Easy to use and effective and efficient to produce more fruit, fattening and breeding when compared to chemical fertilizer products, as well as other chemical vitamins.

PT. MaksiPlus Utama Indonesia opens opportunities for those of you who want to benefit by becoming an agent of MaxiGrow products.

HOW TO BECOME AN AGENT

Please contact:

RULI NUGRAHA
Address : Jl.Raya Bojongkadu, Ds,Batulawang, Kc.Cibinong, Cianjur - Selatan.
Phone/SMS : 0857-9511-6822

ADVANTAGES OF BEING AN AGENT

  • Get a commission (31.25%) from the company of IDR 250,000 for selling one maxigrow package.
  • Earn leadersip commissions

AGENCY SYSTEM
  • Package 1. Potential leadership commission of 1.2 million/day.
  • Package 3. Potential leadership commission of 2.4 million/day.
  • Package 7. Potential leadership commission of 3.6 million/day.
 
For more details please contact:

  • MAXIGROW CIANJUR AGENT

    RULI NUGRAHA
    Address : Jl.Raya Bojongkadu, Ds.Batulawang, Kc.Cibinong, Cianjur - Selatan.
    Phone/SMS : 0857-9511-6822
  • AGEN MAXIGROW TANGERANG

    YANA SUBAGJA
    Address : PERUM CITRA PRIMA SERPONG BLOK B2 NO.7
    Phone / SMS : 085715813629
    WA : 0822-1396-0564
    PinBB : D829E30D
    Email : yana.subagja@yahoo.co.id

Read more article here :

MaxiGrow application on rubber trees

MaxiGrow Application on Rubber - The ideal place and conditions for the growth of rubber plants are areas with an altitude of 200 m, have rainfall of 1,500 - 2,000 mm / year, air temperatures range from 24-28 degrees Celsius and get sunlight 5 - 7 hours / day with soil structure that can continue water, not based on pH between 5 - 6.
 
MaxiGrow Application on rubber trees

MaxiGrow application in rubber plants:
When planting (15 HST - Day After Sowing)


  • Give MaxiGrow solution (1 liter MaxiGrow : water max 100 liters) to plants as much as approximately 0.5 to 1 liter around the base of the stem. At this stage, MaxiGrow needs as much as 3 liters per hectare.
  • After applying MaxiGrow, apply compound chemical fertilizer N-P-K (14-14-14 or 12-24-12) at a dose of 50 grams per tree

The plant has not yet produced

  • Give MaxiGrow solution (1 liter MaxiGrow: water max 100 liters) give around the base of the stem, as much as approximately 1 to 2 liters. Repeat every 3 to 4 months, until the plant can be tapped. At this stage MaxiGrow is needed as much as 8 liters per hectare per year or one application of 2 liters of MaxiGrow per hectare.
  • After applying MaxiGrow, apply compound chemical fertilizer (14-14-14 or 12-24-12) at a dose of 150 grams per tree. Repeat every 6 months (once at the beginning of the rainy season and once at the end of the rainy season).
 
Plants already produce

  • Apply MaxiGrow solution (1 liter MaxiGrow : water max 100 liters) around the base of the stem, as much as approximately 1 - 2 liters. Repeat every 3 to 4 months. At this stage MaxiGrow is needed as much as 12 liters per hectare per year or one application requires 3 to 4 liters of MaxiGrow per hectare.
  • 4 days after applying MaxiGrow, apply compound chemical fertilizer N-P-K (14-14-14 or 12-24-12) as much as approximately 300 grams per tree. Repeat every 6 months (once at the beginning of the rainy season and once at the end of the rainy season).
Read more article :

Amazing facts

 In Lampung, the sap of productive rubber trees after using biofertilizer has doubled. In Kalimantan, rubber trees that are no longer productive return to productivity after being fed MaxiGrow biofertilizer.

Maxigrow application on chili peppers

Maxigrow Applications on chili peppers

MaxiGrow with microorganisms in it will work uniquely and slow release. The pattern will be up to 50% to ensure the availability of macro and micro soil nutrients needed for plants. Using this technology can save the use of chemical fertilizers by up to 50% so as to reduce the cost of purchasing fertilizers.

Chili can grow at low or high altitudes depending on the variety. Good soil in chili cultivation is one that has a soil pH on a scale of 5-6. Chili cultivation is often faced with various problems (risks), including; technical cultivation, nutrient deficiency, pest and disease attacks.

Land fertility is not only supported by chemical and physical elements. But also with a combination of soil biology. This means that in the soil it will be better if there is a combination of these 3 properties. The use of MaxiGrow on crop land will improve the chemical, physical and biological properties of the soil.

Read more article :

Land Processing
Land that has been cultivated, make beds (as shown in the picture), apply manure (already cooked) to each bed, then spray MaxiGrow solution (1 liter MaxiGrow : water max 100 liters), then cover with soil and mulch (if using). Leave for at least 3 days, then it is ready for planting.
At this stage, MaxiGrow needs as much as 2 liters per hectare and manure as much as 4-6 tons per hectare. 

As a breakthrough in fertilization technology with a biological approach, MaxiGrow is able to create a stimulant by empowering a number of special microbes. These microbes are needed in the process of providing macro and micronutrients: Azospirillum Sp; Azostobacter Sp; microbial solvent P; lactobacillus sp; and cellulose-degrading microbes
.
What do microbes do on MaxiGrow?
MaxiGrow biofertilizer is a type of fertilizer that is uniquely able to collect a number of microbes that work to provide macro and micro nutrients and in the long term can affect soil fertility. However, there are also types of microorganisms that are harmful. Research innovations carried out at MaxiGrow succeeded in collecting types of microorganisms that provide benefits with their respective functions as follows:
1. Azotobacter Sp
 Functions as an N(nitrogen) tethering microbe from free air.

2. Azoospirilium Sr.
 Serves as a fastener of N (nitrogen) Bu
 

Application of chemical fertilizers 1st, 15 to 18 days after planting
The needs for 1 hectare of land are as follows: Urea / ZA as much as 80 kg, TSP / SP-36 as much as 100 kg and KCL as much as 75 kg, mix thoroughly, give to around the base of the stem (distance 10 cm from the stem) then cover with soil. Assuming that 1 hectare has 12,000 trees, MaxiGrow Smart Book 29
So for each tree is given a mixture of chemical fertilizers as much as approximately 20 gr.

2nd fertilizer application (35 to 40 days after planting)
The needs and methods of applying chemical fertilizers are the same as the first application, namely Urea / ZA as much as 80 kg, TSP / SP-36 as much as 120 kg and KCL as much as 100 kg. Assuming that if 1 hectare there are 12,000 trees, then for each tree a mixture of chemical fertilizers as much as + 25 gr is given. 

 

Mengenai Saya

Most Reading

Optimize by Jasa SEO. Powered by Blogger.